Reloading Supplies

RCBS FULL LENGTH DIE SET6.5 GRENDAL GP-A

RCBS FULL LENGTH DIE SET17 FIREBALL GP-AFEATURES-Caliber: .17 Fireball-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Diewith an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.-The...

RCBS 3-DIE SET WITH ROLL CRIMP458 WIN MAG GP-CFEATURES-Caliber: .458 Winchester Magnum-The 3-Die Roll Crimp Set is for loading straight-wall cartridges-Its steel Sizer Die sized the case & de-primes-Note: Cases must be lubricated-The Expander Die...

RCBS SHELL HOLDER #13FEATURES-Shell Holder #13-Built from hardened steel-Designed to properly align the case with the reloading die in single-stage & turret presses-Sized to fit specific case heads & capture 0.125" of the case head for proper...

LEE X-PRESS SHELLHOLDER #3

LEE X-PRESS SHELLHOLDER #12

HORNADY LEAD #4 BUCKSHOT5LB. BOX 6BX/CSFEATURES-#4 Buckshot-.240 Diameter-Made with the same dedication to uniformity as Hornady bullets-Hornady Buckshot is cold swaged using a lead alloy hardened with antimony to prevent deformities afterfiring. This...

CVA POWERBELT BULLETS ELR.50 CALIBER 270GR 15-COUNT

CCI #209 MUZZLELOADER PRIMERS2000PK CASEFEATURES-CCI #209: Reduced fouliing when used with blackpowder substitutes-Specially designed for in-line muzzleloading use-Meets individualized needs of muzzleloader users-Easier to seat than ever...

LEE CARBIDE 3-DIE SET45 WIN MAGFEATURES-For .45 Winchester Magnum-3-die set-Carbide full length sizing die-Bullet seating die-Powder thru expanding die-Universal shell holder-Powder dipper-Instructions/load data

LEE POWDER THRU CHARGING DIE44 SPECIAL & 44 MAGNUMFEATURES-For .44 Special-Powder Thru Expanding die-Charges the case while expanding the case mouth-Used with powder funnel adapter or the Auto Disk or Auto Pro Disk powder measure

LEE FULL LENGTH 3-DIE SET7MM-30 WATERS PACESETTERFEATURES-Pacesetter 3 die set for 7-30 Waters-Full length sizing die-Bullet seating die-Factory crimp die-Universal shell holder-Powder dipper-Instructions/load data

LEE UPGRADE KIT FOR XR &ERGO PRIME SYSTEMSFEATURES-Small & large adapters 7 one folding primer tray-Compatible with the Ergo Prime & Auto-Prime X*This update kit will not work on the original Auto-Prime tool with round trays

LEE QUICK TRIM DIE BODY45 LONG COLTFEATURES-Quick trim die for .45 Long Colt

LEE LUBE & SIZING KIT .285!FEATURES-For .285-Lubricates & sizes cast bullets-Seats & crimps gas checks-Fits any standard 7/8x14 thread reloading press**DOES NOT INCLUDE LUBE**

LEE DOUBLE CAVITY MOLD.358-200-RF ALUMINUMFEATURES-.358 diameter-200 grain-Flat bullet-Suitable for cartridges like.35 Remington -Handles included

MEC SUPER SIZER 12GAFEATURES-12 gauge-Re-sizes shells for the most exacting shotguns-Can update conventional reloaders with MEC's exclusive Power-Ring collet resizing device-Eight steel fingers encircle the base & apply even pressure until the base...

LYMAN E-ZEE PILOT 7.62X39FEATURES:-Caliber: 7.62x39-Allows the user to trim cases by hand or with a power attachment (included) to precise pre-set length-The trimmer comes with a case locking device, cutter, trim-to-length pilot, cutter head & both...

MEC POWDER BUSHING #12FEATURES-View MEC's Powder Bushing Chart & Charge Bar Selection information:https://www.mecshootingsports.com/Images/document/PowderBushingChart.pdf

MEC GRABBER BAR RETURN SPRINGFEATURES-Return spring attaches to spring anchor to make the bar function correctly

HSM BULLETS .44 CAL. .430240GR HARD LEAD-SWC 250CT

PETERSON UNPRIMED CASES6.5 PRC 50PACK 10BX/CS

PETERSON UNPRIMED CASES308 WIN 50PACK 10BX/CS

A double-ended wrench for in-line muzzleloaders. Lightweight, easy to carry. Fits most sidelocks as well as #11 and musket nipple.

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...

Years of research and testing by the Hornady Ballistic Development Group, combined with advanced manufacturing processes and quality control measures have led to the creation of the ultimate low drag, high-performance match bullet. Aluminum tip is...

Hornady's ELD-X bullet is a technologically advanced, match accurate, all range hunting bullet. It features highest in class ballistic coefficients and consistent, controlled expansion at all practical hunting distances. Its Heat Shield tip is immune to...

As the name implies, this spherical propellant was designed for accuracy. Because of the unique design, this powder provides flawless ignition with all types of primers including the lead-free versions. Unlike pistol powders of the past, powder position...

Triple Seven Granulated FFFG is the same great powder as FFG with smaller grain size. It is intended for use in pistols and rifles of 50 caliber and smaller. It contains no sulfur, so there are no strong smells and clean-up is easy for rifle and hands...

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge...

Lee's PaceSetter 3-Die Set includes a Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and instructions/load data.

RCBS offers a variety of decapping pins for all reloading needs. Headed pins are for most current production expander-decapping and decapping rods. Small pins are for pre-1990s collet-style rods designed for small-primer cartridges, as well as for...

Lee's Carbide 3-Die Set includes Carbide Full Length Sizing Die, Powder Thru Expanding Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Lee's Carbide 3-Die Set includes Carbide Full Length Sizing Die, Powder Thru Expanding Die, Universal Shell Holder, Powder Dipper and instructions/load data.

Triple Seven 45/50 Pellets are designed for in-line .45 caliber rifles. Clean-up is quick and easy with plain water. These pellets may be used in .45 caliber rifles with saboted .40 caliber bullets for game from squirrel to deer. Designed for use with...

Sierra Pro-Hunter bullets have a traditional, flat base design. These bullets have medium to heavy weights in each caliber and they are designed for a combination of penetration and expansion in medium and heavy game animals for their calibers.

IMR 4831 Rifle Powder has a slightly slower in burn speed than IMR 4350. IMR 4831 gives top velocities and performance with heavier bullets in medium-sized magnums.

Winchester shellcases for rifles are engineered to precise tolerances to ensure smooth-feeding and positive chambering.

CVA's Fiberglass Ramrod provides flexibility to bend without breaking and is 36" long with 10-32 threads. This model is compatible with universal caliber muzzleloaders.

Lee's Carbide 3-Die Set includes Carbide Full Length Sizing Die, Powder Thru Expanding Die, Universal Shell Holder, Powder Dipper and instructions/load data.