Optical Accessories

The C1 Max is the latest addition to our Condition One Modular Mount lineup. The C1 Max was designed ground up with the precision rifle shooter in mind. Borrowing from and blending our Max 50 Scope Ring and C1 Modular Mount designs, the C1 Max has 1"...

The Condition One Modular Mount is Badger Ordnance's answer to a growing demand for modularity in optical platform mounting. With the ever-expanding options available to shooters in the accessory and electro-optic markets, Badger Ordnance saw the need...

The ARC is a modular replacement ring cap for any Condition One Modular Mount. It allows the user to mount a myriad of accessories fore or aft on their C1 Mounts to include different variants of Laser Range Finder rails or 12 o'clock mounted Red Dot...

The Bergara 30 MOA short action rail will come with both 6x48 and 8x40 screws.Features :Short Action6x48 and 8x40 Screws

Standard Height. Plate 6: Aimpoint Acro P1/P2, Steiner MPSFeatures :Standard HeightFits Arisaka Offset Optic Mount

The Ultralight 30mm SPR Scope Mount features a rear ring that is pushed forward 2", resulting in better eye relief. This scope mount is designed to fit AR type upper receivers with Mil-Spec 1913 Picatinny rails and features a cross-slot keyway that...

The AD-T1 lightweight mount is designed for the Aimpoint T1/T2 and similar red dots. This sleek design offers 20% in weight reduction and a less obstructed view of your target for more situational awareness compared to traditional mounts. This mount is...

The AD-MRO lightweight mount is designed for the Trijicon Miniature Rifle Optic. This sleek design offers 20% in weight reduction and a less obstructed view of your target for more situational awareness compared to traditional mounts. It is precision...

The AD-509T QD mount was developed for the Holosun 509T red dot for use on AR pistols and other weapon platforms requiring a small, light weight red dot system. The AD-509T QD mount is a one piece unit precision machined from 6061 T6 aluminum and...

The Revolver Optic Conversion (R.O.C.) allows for the process of modifying a revolver to accept a red dot sight (RDS). Traditionally, revolvers have been equipped with iron sights, but the trend in recent years is to adapt them to modern sighting...

This riser allows you to use a same plane front sight on any YHM railed gas block. Perfect for use with their new Q.D.S.(R) same plane sight system.Features :Aluminum constructionAnodized finish

These rings feature two straps and four screws for added gripping power for these lightweight, all aircraft aluminum rings. Weaver legendary quality at a modest price.Features :Aluminum constructionThumbscrews for quick detach

Each Weaver base is machined to tight tolerances for a custom fit. These aluminum bases offer maximum strength for rings to hold tight.Features :Machined Aluminum Construction offers tight tolerances for a custom fitOffer the rock solid Weaver cross-lock...

Get the best of both worlds with a steel strap for added strength and an aluminum saddle for reduced weight. These quick detach rings are the Original Weaver style Rings.Features :Original style Weaver ringsReinforced for extra strengthReduced weight...

These rings use a four-screw system, and have steel caps and an aluminum saddle for added strength. Also features the quick detach system, allowing you to loosen the thumb screws and go to iron sights in seconds.Features :Original style Weaver...

These versatile bases from Weaver help give your gun a versatile edge. Multi Slot Bases are constructed of tough, lightweight aluminum so they can withstand the most powerful recoil. They accept all Weaver Top Mount Rings and accommodate the mounting of...

FAST is a series of optic mounts and platforms that provide end users with a quicker sight picture than standard height mounts. A 2.26" optical centerline height provides faster/easier reticle acquisition while wearing electronic EarPro/communications...

Optional QD lever for FAST Micro Mounts. The FAST Magnifier Mount Series comes with this lever pre-installed. Not compatible with the FAST Optic Riser.Features :7075-T6 Aluminum and Type IIIHardcoat AnodizedCompatible with UNITY FAST Mounts

Super slim picatinny riser mount made by UTG.Features :Torx Screws and Square-shaped Integral Recoil Stops for a Secure Zero HoldLightening Cuts Massively Reduce WeightIncludes a T20 Torx Wrench

The Trijicon Bolt Action Mount features a 34mm tube, and is designed to keep the optic as low as possible for hunting and long range precision rifle applications. Featuring a Mil-Spec drop test rated 6061-T6 aluminum design and a flush mounting bolt...

The Trijicon Bolt Action Mount features a 34mm tube, and is designed to keep the optic as low as possible for hunting and long range precision rifle applications. Featuring a Mil-Spec drop test rated 6061-T6 aluminum design and a flush mounting bolt...

The one-piece construction of the Talley Lightweight Alloy Scope Mount is unique. The rigid design has no joint between the scope and the rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose...

The Talley Modern Sporting (TMS) Ring is a new solution for your Picatinny rail system with a clean and simplified appearance. These picatinny scope rings are designed to work with any rail designed to MIL-STD-1913 picatinny rail specs. Machined from...

The one-piece construction of the Talley Lightweight Alloy Scope Mount is unique. The rigid design has no joint between the scope and the rifle. The Talley Lightweight unitized design eliminates the possibility of an out of alignment interface or loose...

1 piece picatinny riser made by Truglo.Features :Mounts to existing picatinny railCNC machined aluminumEasy installation"4" length"

Ruger 30mm extra high ring with matte blued finish, accommodates objective lens diameters up to 62mm.Features :Genuine Ruger® Factory AccessoryMatte blued finish

The DOT Mount(TM) by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the DOT Mount attaches to any M1913 Picatinny rail, and offers...

The DOT Mount(TM) by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the DOT Mount attaches to any M1913 Picatinny rail, and offers...

Introducing the AUS Mount for 30mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mount is the culmination of a 2 year development program. Like their DOT Mount line the AUS Mount attaches to any M1913...

The Midwest Industries Alpha Series Top Cover brings the AK platform into the 21st century. Machined from 6061 aluminum and given a durable hard coat anodized finish. Patented components allow for an accurate return to zero solution for existing AK...

These mounting rings for weaver and picatinny rails are made from aircraft aluminum and are supremely versatile, because they are able to accommodate both the 30mm or 1" scopes by adding or removing the internal ring they come complete with. the #7237...

Mounting red dot optics, like the Trijicon RMR, on shotguns has become super popular. The GG&G 1301 Optic Rail with your choice of a full or half ghost ring fills the bill so to speak, for the Beretta 1301 Shotgun. Whether you are hunting with the 1301...

HYDRA is the first dual optic mount designed for end-users that offers a 2.91" Optic Centerline for faster target ID, regardless of gear/ equipment obstructions, i.e.. EarPro/Comms headsets, Gas masks/ CBRN, and Night vision use. A higher Optic allows...

Every DNZ Scope Mount is precision machined in North Carolina from Top Grade, Solid Billet Aluminum. Ultralight with maximum shock absorption, there are no movable parts between rifle and scope.Features :Ultra-LightPrecision MachinedMaximum Shock...

Every DNZ Scope Mount is precision machined in North Carolina from Top Grade, Solid Billet Aluminum. Ultralight with maximum shock absorption, there are no movable parts between rifle and scope.Features :Ultra-LightPrecision MachinedMaximum Shock...

The C&H Precision plates are designed, manufactured and shipped from their small family owned business in Coastal Georgia. Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality...

The C&H Precision plates are designed, manufactured and shipped from their small family owned business in Coastal Georgia. Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality...

The Cheat Sheet from Cole-TAC offers the perfect way to keep your important data in clear view. By mounting the Cheat Sheet directly to your scope, you can easily see your DOPE without having to break your position. This simple but effective design works...

These Weaver-style rings are solid steel, so you can rely on their accuracy.Features :Machined to exact toleranceTop and bottom matched for strength and fitHandles recoil of any rifle

Butler Creek's famous Flip-Open lens cover design with clear windows for fast target acquisition at close to medium ranges.Features :Lenses crafted of optical-grade polymersAmbi open and close"Silent" spring-loaded operation"Reliable in extreme conditions