Other Parts

This #3 backstrap is used with the magazine backstrap sleeves for Springfield XD-M Compact .45 with 3.8" barrel.

The Aim Sports Gas Tube Rifle is precision manufactured from stainless steel.

Wilson Combat's 16 lb. recoil spring full size 5" .38 Super shooting target ammunition with a power factor of 160,000 to 175,000 (Velocity x Bullet Weight = Power Factor) Average service life 20,000 Rounds. Keeping a fresh recoil spring in your pistol...

Slip over hard-to-reach or hard-to-cock hammers for extra leverage. A must for scoped guns with external hammers. Blued steel, knurled surface for easy gripping. Fits most hammer-type guns, either right or left side. (Allen wrench included.) No low wall...

The Cocking Handle was designed to be used when gloves are a necessity. Compatible with: A300, 303, 390, 391, 3901

Heckler and Koch SL8/USC Aluminum Picatinny Forearm Rail. Machined from quality aluminum, this forearm Picatinny rail section is designed for the HK USC and SL8 model rifles. This rail section installs onto the side of the receiver and provides roughly 4...

Replace existing XRS forend with an enclosed version for additional barrel protection. Integral ARCA, RRS/Dovetail along the entire length of the forend. Additional M-LOK attachment slots. Accommodates up to a 1.25" barrel profile, although using M-LOK...

For a Glock Compatible trigger designed to maximize performance, consider Tyrant CNCs I.T.T.S Trigger, an excellent upgrade for your Gen 3 or Gen 4 Glock handgun. The I.T.T.S. trigger boasts a 15% reduced take-up and a 10% reduced reset travel distance.

We took the time tested ZPS.1 slide and blended it with the Blowhole Compensator allowing you to manage that unruly gas. Gain the flat shooting features of our compensated setup without the threaded barrel. The single billet 17-4 stainless steel slides...

MDT ORYX Chassis System was designed to be the best all-around aftermarket stock replacement for people wanting to enhance their accuracy. It's designed for people that want to get into precision rifle shooting with factory rifles. The metal chassis was...

Experienced shooters realize plastic guide rods can chip, crack, or break resulting in feeding or ejection failures, flex can also contribute to accuracy problems. Rival Arms Guide Rod Assemblies address all of these issues and will provide you a...

The Recover Rail is engineered to fit perfectly on the Glock 42 pistol. The rail enables compatibility with rail mounted gun accessories. Easy to install with the supplied hardware. No modifications to your Glock required, will not damage your firearm. ...

This M-LOK Handguard is compatible with Mossberg 500, 509 and Maverick 88 shotguns. It features M-LOK slots on both sides and bottom for mounting accessories. The handguard is made of a heat-resistant polymer with a sleek design.

Timber Creek's QD End Plate replaces the standard AR end plate and adds a mounting point for QD sling swivels. With its non- rotational three locking positions it accommodates for both left and right hand shooters.

Aeros' Carbine Buffer tube for AR15/AR10 platforms. Features Mil-spec dimension and 6-position. Made in the USA.

Timber Creek's QD End Plate replaces the standard AR end plate and adds a mounting point for QD sling swivels. With its non- rotational three locking positions it accommodates for both left and right hand shooters.

The FN FX9 Trigger is built for top competitive shooters to offer the most accurate and dependable trigger on the market. Featuring Frictionless Release Technology, this drop-in AR trigger has a short, two-stage action, designed to feel like a 1911...

The Phase 5 PMR is a CNC machined 6061-T6 billet aluminum magazine release button. Easy to install, the PMR is a drop-in component that replaces the Mil-Spec magazine release button.

The Strike Industries Shift Pins bring yet another innovative solution to the AR15 market. Already keeping the extended grip surface for easy disassembly without a need for a pin punch, the pins are also designed with Quick Detach mechanisms that result...

Backstrap sleeve slides down over the top of the magazine and fills the gap between the bottom of the grip frame and the base of the magazine. This sleeve only fits the #1 backstrap.

The UTG Pro AR15 15" Super Slim Free Float Keymond Handguard is free-floating with proprietary Barrel nut design. 112 Keymod compatible slots on 7 Keymod compatible slot tracks for mounting keymod compatible rails and accessories with diverse...

Timney Triggers feature precision machining, workmanship and are individually tested and calibrated by hand. The AR Targa 2-Stage Trigger is a 100 percent drop-in unit that is ready to install in your AR-15 for an exceptionally smooth, crisp, two-stage...

Made in the USA, the MOE SL Hand Guard for AR15/M4 firearms with mid-length gas system and A2 front sight provides modular flexibility with M-LOK accessory slots in a lightweight, sleek, cost effective design. Reinforced, heat-resistant polymer...

The Spike's Tactical Laser Engraved Ejection Port Doors are an easy and inexpensive way to personalize your AR-15. With so many choices available, it will take you longer to choose than it will to install. It is a Mil-Spec ejection port door constructed...

The Tyrant CNC Heckler & Koch Rear Slide Cap for the HK VP9/VP40 is a 3D CNC machined backplate with a chamfered design and smooth edges. Meant for the Heckler & Koch VP9/VP40 and made from aerospace-grade aluminum, this anodized backplate adds a...

Adjustable to insure it fits any mil-spec and most billet uppers and ejection port

The RISR is spring-loaded, and travels to the rear as the charging handle is moved to the rear. When the charging handle is released, the RISR snaps forward. Designed to fit the excellent Magpul CTR butt stock without modification, the RISR only takes a...

The Tyrant CNC made Smith & Wesson M&P trigger for both 1.0 and 2.0 Generation guns. Whether handling a full-size or compact model, the M&P 1.0/2.0 trigger is engineered to enhance the functionality and efficiency of firearms. A reduced take...

Fits: Remington 870/1100/11-87. Designed for reliability and built to perform, the EX Performance Tactical Light Forend is an engineered solution to your low light firearm needs. Quickly and easily upgrade your Remington or Mossberg shotgun to be a more...

Machined from 6061-T6 Aluminum, the R-ONE line of handguards are designed with size and weight in mind, providing the perfect handguard for your lightweight build. Aero's proprietary ATLAS attachment system is a durable and dependable mounting platform,...

Enjoy using a slide-mounted reflex sight without needing suppressor height iron sights. The factory-installed ROMEO-X PRO optic sits incredibly low to the slide so you can enjoy co-witness with the included standard height iron sights, giving a...

Warne Vapor rails are designed to offer shooters an affordable and reliable mounting platform manufactured for your specific firearm. 20 MOA of elevation built in for longer distance shooting. Fits Picatinny & Weaver style rings and are NATO-STANAG...

A stuck cartridge in your AR-15 renders your weapon useless until cleared. Carbine instructors train students to slam the butt of the gun against the ground to free stuck casings causing potential damage to your firearm. The patented LevAR ratcheting...

The Remington 700 Two-Stage triggers were developed with the same unmatched zero-creep break, tactile pull weight adjustment (on both stages), rugged design, and no compromise engineering. It is built with a four points of safety. This is a new level of...