Barrels / Chokes / Muzzle Devices

This 1.375"-24 HUB Direct Thread Mount will convert HUB compatible suppressors to a direct thread mounting system. To install, simply remove your existing mount mechanism from your suppressor and thread on their HUB Direct Thread Mount using a 3/4" open...

This 3-port muzzle brake is compatible with all SilencerCo ASR Mounts and with multiple thread and caliber options, you can shoot suppressed for any demand. It offers quick and easy one-hand-on, one-hand-off attachment and detachment. The 3-port design...

Replace the Front Cap on your Omega 300 or Hybrid 46 with a SilencerCo Bravo Anchor Brake. The Anchor brake improves sound reduction and mitigates recoil, allowing the shooter to re-acquire the target for faster follow-up shots. Bravo accessories are...

Rugged Suppressors, Fixed Barrel Spacer

The Cherry Bomb by Q is a Quickie Fast-Attach muzzle brake compatible with the THUNDER CHICKEN and trash PANDA silencers by Q. It features their taper mount shoulder to align with their barrels and silencers, uses a 1/2 inch socket on the front for easy...

Fixed mount works with your Ghost-M!Features :1/2X36 Thread Pitch

This 1.375"-24 HUB Direct Thread Mount will convert HUB compatible suppressors to a direct thread mounting system. To install, simply remove your existing mount mechanism from your suppressor and thread on their HUB Direct Thread Mount using a 3/4" open...

The SureFire Warden Blast Regulator directs the concussive blast of the fired round forward of the weapon system without venting gas to the side, as seen with standard muzzle brakes. This aids in reducing the overpressure felt by others immediately to...

Dead Air Silencers is all about bringing the best materials, the best designers, and the best manufacturing techniques to the suppressor market. Because it needs it.Features :Precise ManufacturingLong Term ReliabilityDurable Construction

The VICTRA-12 Mount Assembly is a bit different than your ordinary mount assembly. YHM's threads into the end of your shotgun's barrel using the standard choke threads to mount the suppressor to the shotgun, but it does not choke your shot. That is...

SilencerCo's O-Ring Pack for their rimfire suppressors contains replacement O-rings for a Sparrow, Warlock II, or Spectre II silencer to keep it running at its maximum sound suppression capability. The O-rings are a critical part because they contain...

SilencerCo pistons were designed to be easily changed for different host firearms or calibers. Pistons are built with 17-4 stainless steel, then heat-treated for maximum durability. The piston is part of the Nielson device that moves and allows...

The FN SCAR(R) barrel assemblies are cold hammer-forged, chrome-lined MIL-SPEC steel barrels with front sight assembly, gas block assembly, gas regulator, gas piston and flash hider installed. Available in short lengths for reduced weight, fast handling...

SilencerCo's 3-lug Muzzle Device allows you to work in conjunction with 3-lug quick detach style suppressorsFeatures :Allows for the secure attachment of silencers with 3-lug adapters

This front cap optimizes your Sandman silencer by reducing the front cap size to your caliber. For example, the 5.56 front cap greatly reduces first round pop, and decreases the muzzle reading by roughly 1 to 3 dB.Features :Reduces front cap size to...

The DDWAVE Muzzle Brake is designed to securely mount the DD WAVE suppressor to the host firearm. Manufactured from aerospace 17-4 PH stainless steel and salt bath nitride finished for minimal corrosion. Heavy acme threads serve to disrupt carbon...

SureFire WARCOMP-556-CTN is a closed tine flash hider that is neutrally ported to aid in recoil management. Compared to that of the open tine adapters, the WARCOMP-CTN for 5.56 caliber weapons mimics that of a traditional birdcage flash hider along with...

This 3-port muzzle brake is compatible with all SilencerCo ASR Mounts and with multiple thread and caliber options, you can shoot suppressed for any demand. It offers quick and easy one-hand-on, one-hand-off attachment and detachment. The 3-port design...

Alpha direct thread mount made by SilencerCo.Features :Made in the USABlack finish

This front cap optimizes your Sandman silencer by reducing the front cap size to your caliber. For example, the 5.56 front cap greatly reduces first round pop, and decreases the muzzle reading by roughly 1 to 3 dB.Features :Reduces front cap size to...

This .223 Rem / 5.56 NATO Radial Port Muzzle Brake muzzle brake's design reduces felt recoil and muzzle movement. It is made from alloy steel with a black oxide finish to complement most firearms. Installs with a 11/16" open end wrench or crescent wrench...

Looking to reduce as much weight and length as possible with your build? The Kurz Q.D, Adapter from YHM allows the user to shorten their Phantom Q.D. mounting system by .675" on any suppressor utilizing the 1-3/8"-24 rear mounting threads. Don't just...

SilencerCo Direct Thread Mounts are a simple solution to attach their silencers to any firearm. The Bravo Direct Thread Mount is compatible with the Omega 300, Hybrid 46, and Harvester 338. Compared to the ASR Mount, the Direct Thread Mount shortens the...

The AAC BlackOut Muzzle Brake 51T 7.62MM. These highly effective muzzle brakes are compatible with AAC 51T sound suppressors. All AAC Blackout muzzle brakes are machined from high strength aerospace steel alloy and coated in a hard, durable, corrosion...

The advanced SureFire ProComp 556 muzzle brake, which fits M4/M16 weapons and variants with 1/2-28 muzzle threads, greatly reduces both recoil impulse and muzzle rise so that the weapon tracks straight back to keep you on target for faster shot-to-shot...

Designed by POF this nitride heat treated muzzle brake controls muzzle impulse for ultimate accuracy and an unbelievably soft recoil. Comes complete with a nitride heat treated collar and five (5) strike prongs.Features :5/8X24 Thread pitchNitride...

The Bravo Front Cap is compatible with Omega 300 and Hybrid 46. Swap out the Anchor Brake for an overall shorter silencer ? from 7.09" to just 6.06". Using correct front caps will reduce dB levels between 2?-5 dB.Features :Can reduce dB levels between...

The Cherry Bomb by Q is a Quickie Fast-Attach muzzle brake compatible with the THUNDER CHICKEN and trash PANDA silencers by Q. It features their taper mount shoulder to align with their barrels and silencers, uses a 1/2 inch socket on the front for easy...

Features :Mid Length Gas System"20" Barrel"1:7 Twist

AAC's A.S.A.P system allows the silencer to function properly with tilting barrel semi-automatic pistols. However, when used on fixed barrels hosts, the A.S.A.P system needs to be disengaged for proper function.Features :For Ti-RANT 45/9M-HD and Illusion...

SilencerCo pistons were designed to be easily changed for different host firearms or calibers. Pistons are built with 17-4 stainless steel, then heat-treated for maximum durability. The piston is part of the Nielson device that moves and allows...

This protective cap will keep the ACME threads on your Q.D. flash hiders and mounts from becoming dirty or damaged when your suppressor is not in use.Features :Does not fit the .338 QD mounts

SilencerCo pistons were designed to be easily changed for different host firearms or calibers. Pistons are built with 17-4 stainless steel, then heat-treated for maximum durability. The piston is part of the Nielson device that moves and allows...

The Rugged Universal Direct Thread Mount allows the Alaskan360 and other suppressors utilizing the 1.375 X 24 thread pattern to mount directly to the barrel of a firearm. The Universal Direct Thread Mount is available in 5 thread pitches and enables the...

Rugged's piston uses a non-slotted design creating a full circumference gas seal. This drastically lowers gas blowback for a more enjoyable shooting experience. Machined from 17-4 Stainless Steel and heat treated this piston is built to last. When using...

The Radian AFTERBURNER + RAMJET combo provide unprecedented recoil reduction and match grade accuracy in a concealed carry package. The threadless barrel design allows for effortless install/removal for cleaning. The AFTERBURNER compensator is machined...

The KeyMo Muzzle Brake is your gateway to silence. When you're ready for peace and quiet use the KeyMo brake to quickly attach your Sandman Series or KeyMo equipped suppressor to your rifle. If you're not quite ready to turn up the silence, you can still...

Features :Precise ManufacturingLong Term ReliabilityDurable Construction

YHM's line of sRx products were designed with aesthetics and ease-of-use as the top priorities, and that is no different for the YHM sRx Q.D. Adapter (YHM-4400). This Low Profile, Q.D. Adapter/Mounting Interface attaches to the industry standard (HUB)...

The ASR Flash Hider is compatible with SilencerCo's ASR (Active Spring Retention) Mounts. The ASR (Active Spring Retention) Mount is a quick attach / detach system for almost all SilencerCo suppressors. The simple one-hand-on, one-hand-off mounting...