Barrels / Chokes / Muzzle Devices

Single choke adapters for mounting the Salvo 12 shotgun suppressor. Choose the choke style for specific shotgun and select the spread pattern from the dropdown menu.

The RR3 choke is made for long-range targets. This choke is specifically designed for geese and open water ducks. The internal cuts provide optimal pattern density when paired with the correct loads. These choke tubes are built from years of product...

Kick's Buck Kicker Extended choke for buckshot is a diagonally-ported design for recoil reduction. Conical/parallel internal configuration. Easy to install and remove with your fingers. No special wrench or tool required

Faxon's MATCH SERIES of barrels takes the renowned performance and value up a notch. 5R is a hybrid rifling, with lands opposite grooves and reduced sharp angles that reduces jacket deformation increasing velocity and easy cleaning. After rigorous...

The OTB Muzzle Brake works the same as the standard OTB mount, only with a built in muzzle device, Made from H900 heat treated 17-4 steel this one piece adapter will allow you to mount your OPS 12th model, OCM5 or AEM5 to ANY barrel with 1/228 threads...

The CIRCLE edition pistol compensator from the Strike Micro Threaded Comp can work with just about any size slide using a threaded barrel with 1/2"x28 Threads Per Inch. SI internal testing has typically seen a reduction average range (dependent on...

The Tactical Solutions PAC-LITE pistol barrel is a lightweight and accurate .22 LR barrel and receiver for the Ruger Mark IV or Mark IV 22/45 pistol. The Pac-Lite upgrade represents what TacSol is known for in the .22LR aftermarket barrel industry;...

Up to 64% lighter than traditional steel barrels of similar contour. Improved heat dissipation for cooler and longer lasting barrels. Wrapped with high-strength, aerospace-grade carbon fiber impregnated with a proprietary matrix resin.

The GSG-MP40P 9mm pistol converts the original M13x1 metric thread to a standard 1/2X36 thread. It allows you to attach 1/2X36 muzzle device or suppressor to your GSG-MP40P 9mm Pistol. This item does not work for GSG-MP40 .22LR rifles.

Made in the USA, these chokes are for the Beretta/Benelli Mobil shotguns. Steel, Lead, & Hevi-Shot may be used in this constriction, however, no Steel shot larger than #BB or speeds exceeding 1550 fps should be used in choke tube tighter than full...

Primos TSS Jelly Head Choke Tubes are specifically designed for the all new TSS load that is taking over the turkey hunting industry. The TSS Jelly Head allows hunters to have a super-tight, evenly spread pattern allowing them the accuracy to kill even...

This Mossberg 28" All-Purpose barrel features a vent rib, front fiber optic sight, Modifed choke tube, and matte blued finish. It is compatible with Mossberg 930 12 gauge models.

Once you've purchased a Mark XIX Desert Eagle you can change the barrel length in seconds, if you have the appropriate components in hand.

This muzzle brake is specifically designed for the 9.20" barrel of the PLR-16.

Kicks High Flyer Choke Tubes are an extended choke with a diagonally-ported design for recoil reduction Conical/parallel internal configuration. Easy to install and remove with your fingers. No special wrench or tool required.

The RR1 choke is the premium choice for close-range targets. The internal cuts provide optimal pattern density when paired with the correct loads. These choke tubes are built from years of product development and innovations using the highest advanced...

These suppressor thread adapters allows user to convert AK-47 style 14x1mm LH and HK style 15x1mm RH threaded muzzles to receive 5/8x24 threaded accessories. These surplus rifle threads require a muzzle face index for perpendicularity, making them...

Carlson's Delta Waterfowl Extended Choke Tubes are manufactured from 1704 stainless steel and designed to throw tighter and denser patterns than conventional choke tubes. These choke tubes feature a 25% longer parallel section in the choke, thus throwing...

Fluted to reduce weight and increase cooling, Reverse target crown to protect rifling at end of barrel, Drop-in installation, Black Nitride coating finish, SAAMI spec chamber, Made in the USA

The Bismuth Bone Buster choke tube is designed to produce excellent, dense patterns with all Bismuth ammunition. It is CNC precision machining from 17-4 heat treated stainless steel featuring a longer parallel section (inside the choke) over conventional...

OSS QD Muzzle Brake and suppressor mount are compatible with HX-QD Magnum Ti Suppressors.

Carlson's Delta Waterfowl Extended Choke Tubes are manufactured from 1704 stainless steel and designed to throw tighter and denser patterns than conventional choke tubes. These choke tubes feature a 25% longer parallel section in the choke, thus throwing...

Carlson's Cremator Choke Tubes feature our new Triple Shot Technology and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube, that allow a more gradual transition from the...

The linear compensator, by Tacfire, redirects sound and concussion away from the shooter and down range. This device is particularly useful for AR Pistol builds and rifles with short barrels.

The Truglo Head Banger Long Range Turkey choke tube multi-phase groove technology engages the shot cup and guides the pellets into a tight and consistent pattern, shot after shot. Rated for HEVISHOT, Winchester, Long Beard XR, Federal Premium 3rd Degree...

This high-performance choke delivers dense, even patterns and maximum kinetic energy at extended ranges. Featuring unique internal groove technology, it separates pellets from the wad, while straight rifling prevents wad spinning, ensuring more pellets...

Designed to switch easily between different calibers, this cap ensures optimal performance for both suppressors and MAAD brakes. Using correct front caps will reduce dB levels between 2 to 5 dB on a suppressor.

The new calibrated U.R.P tunable top ports have been designed for maximum adjustment making the Gen 4 line of brakes the flattest shooting brakes available hands down. By testing port size, location, and how the gas feeds into them, we have been able to...

The 8.6 BLK Flash Hider by Q is a Quickie Fast-Attach flash hider compatible with the PORQ CHOP and short CHOP silencers by Q. 5/8x24 features 13/16 in flats, and 1/2x28 features 3/4 flats for easy install and removal.

The RR3 choke is made for long-range targets. This choke is specifically designed for geese and open water ducks. The internal cuts provide optimal pattern density when paired with the correct loads. These choke tubes are built from years of product...

This P22 adapter is designed for the Walther P22 and replaces your standard barrel nut. Adapts an M8x.75 threaded barrel to a 1/2-28 threaded muzzle device. This adapter has the short guide. The adapter can mount any silencer threaded 1/2X28.

When needing a choke for shots at the mid range, such as flooded timber mallards, dove and most sporting clays targets, and 16 yard trap, this choke makes the grade. These choke tubes are built from years of product development and innovations using the...

Bismuth is a popular material used in shot shells throughout the industry. This shot performs best when paired with the RRaptor BIZ choke. This choke is a strong addition to the RRaptor Series. These choke tubes are built from years of product...