Barrels / Chokes / Muzzle Devices

Turned from 4140 steel with a nitride finish, the 7.62mm ZEROED SVD Brake provides efficient recoil mitigation in a compact size. Designed to have the same exterior dimensions as a mil-spec A2 flash hider, the 7.62 SVD brake allows for direct QD...

Primos TSS Jelly Head Choke Tubes are specifically designed for the all new TSS load that is taking over the turkey hunting industry. The TSS Jelly Head allows hunters to have a super-tight, evenly spread pattern allowing them the accuracy to kill even...

Daniel's cold hammer forged barrels are known to be as accurate and long lasting as any you'll find. And now, you can easily switch the caliber of your DELTA 5 with this barrel conversion kit. They've taken the modularity found in our AR's and adopted it...

Convert SRD45 suppressor to a 16x1 Left Hand thread pitch with the SRD-PISTON-M16X1LH. The piston is made of 17-4 heat treated stainless steel, with a matte glass bead finish, and it will fit a variety of hosts. Simply swap the conversion piston with the...

Built from high-quality stainless steel, precision polished and treated with premium coatings, these barrels rival custom work and deliver the best in accuracy and performance, round after round. Threaded barrels and protectors use 1/2"-28 threads for...

Faxon's Integral Rifle Barrels are the perfect choice for any shooter who is looking for the maneuverability of a shorter overall length, but wants the compatibility and versatility that comes with an AR-15 build. With Faxon's Integral Muzzle Device...

Dense/even patterns and maximum kinetic energy at extended ranges. Unique internal groove technology helps separate pellets from the wad. Straight rifling stops wad from spinning & focuses more pellets on target. Castle cuts on the crown lock choke...

This updated release combines the time tested ZPS.1 slide integrated with the Blowhole Compensator allowing you to manage that unruly gas. Adding an angled port and back-bored barrel pushes more gas up and out, reducing carbon buildup in slides. Gain the...

When needing to deliver a crushing shot at the edge of the range this is the choke. High flyers and long trap targets are not safe from this choke. Safe with steel, exotic non-toxics or lead shot. These choke tubes are built from years of product...

Carlsons Cremator Choke Tubes feature the new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition...

An optimum combination of high tensile strength along with requisite toughness to withstand extreme chamber pressures encountered during firing. Excellent erosion wear characteristics and corrosion resistance.

The times of sending off your Sig Cross to have the barrel changed is over with Proof's drop-in barrel Design! Stand-alone and guaranteed to headspace is achievable at your own home with no gunsmith required!

An optimum combination of high tensile strength along with requisite toughness to withstand extreme chamber pressures encountered during firing. Excellent erosion wear characteristics and corrosion resistance.

Primos TSS Jelly Head Choke Tubes are specifically designed for the all new TSS load that is taking over the turkey hunting industry. The TSS Jelly Head allows hunters to have a super-tight, evenly spread pattern allowing them the accuracy to kill even...

Carlson's Cremator Choke Tubes feature our new Triple Shot Technology and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube, that allow a more gradual transition from the...

Carlson's Delta Waterfowl Extended Choke Tubes are manufactured from 1704 stainless steel and designed to throw tighter and denser patterns than conventional choke tubes. These choke tubes feature a 25% longer parallel section in the choke, thus throwing...

Sig replacement barrel is for SIG SAUER P938, chambered in 9MM and is 3" long. It is specially heat-treated for toughness and durability.

Carlson's Ported Buckshot choke tube is designed to give you tight patterns downrange with 00 & 000 buckshot. This choke is ported to reduce recoil and muzzle jump that tend to go hand in hand with these large loads. This choke features a...

Chambered in .9mm, this barrel is meant to fit with the P320 Compact model. The barrel can be replaced easily and conveniently by simply ensuring the firearm is unloaded, removing the slide from the receiver and grip module, and sliding out the existing...

The Winchester Invector-Plus interchangeable choke tube system works hand-in-hand with back-boring to offer consistent, dense shot patterns with just the constriction needed for the shooting situation. The longer choke taper inside an Invector-Plus choke...

The Rosco Manufacturings line of Glock barrels are a drop-in, match grade option that enhances the accuracy and performance of any stock Glock pistol. All Bloodline Glock barrels are made from 416R stainless steel, broached, honed, polished, and then...

Single choke adapters for mounting the Salvo 12 shotgun suppressor. Choose the choke style for specific shotgun and select the spread pattern from the dropdown menu.

These suppressor thread adapters allows user to convert AK-47 style 14x1mm LH and HK style 15x1mm RH threaded muzzles to receive 5/8x24 threaded accessories. These surplus rifle threads require a muzzle face index for perpendicularity, making them...

Kicks High Flyer Choke Tubes are an extended choke with a diagonally-ported design for recoil reduction Conical/parallel internal configuration. Easy to install and remove with your fingers. No special wrench or tool required.

Intended for close and quick work such as skeet, teal or quail. Provides a wide but uniform pattern to cover fast moving targets. These choke tubes are built from years of product development and innovations using the highest advanced technology...

Up to 64% lighter than traditional steel barrels of similar contour. Improved heat dissipation for cooler and longer lasting barrels. Wrapped with high-strength, aerospace-grade carbon fiber impregnated with a proprietary matrix resin.

Replace your barrel, or finish your build with this 18" black nitride barrel from Diamondback! Made of 4150 CMV with a midlength gas system.

A common problem in short barrel PDWs with low-pressure cartridges is reliable cycling. Maxim Defense Hate Brake muzzle booster is designed to regulate firearm exhaust gases to ensure PDWs cycle more reliably. The primary design features include the...

Carlson's Cremator Choke Tubes feature our new Triple Shot Technology and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube, that allow a more gradual transition from the...

The Timber 50 Beowolf Muzzle Brake is compatible with barrels having a bore diameter of .50 or less and 49/64-20 muzzle threads. Includes locking nut.

This replacement barrel is constructed of stainless steel with an integrated Picatinny rail and fixed front sight. It is compatible with the Desert Eagle 429DE.

The ST1 employs an angled baffle design that applies downward pressure while not venting gas into the line of sight or increasing ground disturbance. This results in a drastic reduction of felt recoil as well as minimal muzzle rise.