Gun Parts & Accessories

Requires low profile gas block, Two mil-spec 1913 picatinny rail sections

The Model 20A Open Top Magazine Pouch uses a heavy-duty spring steel clip to attach to the belt, securing it just outside the waistband. Quick and compact, this pouch puts magazines close at hand. It fits belts up to 1.75 in. (45 mm) and is constructed...

Hogue rubber grips are molded from durable synthetic rubber that is not spongy or tacky, yet provides a soft recoil absorbing feel without affecting accuracy. The flexibility of the materials and molding process produces rubber grips with features that...

The Lyman Universal Brass Catcher wraps securely around stock with a Velcro strap. No firearm modifications are needed. The bag is heat resistant, adjustable and low profile, to clear optics or scopes. Catch bag can hold up to 60, 223 cases.

The Phase 5 Hex-2 is an AR type Buffer Tube that starts with a hexagonal shape and the rear most portion is round. This tube was specifically designed this way to utilize the SB Tactical Pistol Stabilizing Braces that can accept a 1.2" round buffer tube...

Dropping this kit into your Smith & Wesson M&P will set the trigger break point farther forward than the factory trigger assembly, as well as significantly reduce the uptake and over travel. It produces a trigger pull very similar to that of a...

The original Ergo Grip, developed by Steve Hines, was the first truly ergonomic, shooter focused grip for AR platform rifles. Designed for performance by creating a better interface between the shooter and firearm, the Ergo Grip is still the standard by...

CALIBER:.223 WYLDE CHAMBER FOR 5.56MM AND .223 CALIBERUPPER RECEIVER:FORGED A4BARREL:20-INCH AIR GAUGED HEAVY MATCH STAINLESS STEEL, 1:8 TWIST, CRYOGENICALLY TREATEDMUZZLE DEVICE:A2 FLASH HIDER / 1/228 THREADGAS BLOCK:GAS BLOCK SIGHT BASEHANDGUARD:RRA NM...

This vertical/horizontal mount holds one gun and includes thick padding, a heavy-duty nylon hook-and-loop strap, is constructed of steel and is easy to install.

Chambered in 308 Win, this rifle upper is completely built and ready to be put on a lower. Includes Bolt Carrier Group.

Compatible with Beretta 92, 92fs, M9 / CZ 75/75b, P09, P10f / FN FN5.7, FNX, FNS 40 Longslide, 9 Longslide, 509 Tactical / H&K VP tactical, VP40, HK 45, P30L, Mark 23, USP Tactical / Ruger 3810, 3811, American, Security-9 / Sig Sauer P220, P226,...

The Limb Grip Bow holder quickly and solidly attaches to any tree stand frame with a secure u-bolt connection. The Premium Silent-Grip Limb Fork adjusts 360 and locks securely with geared teeth at the perfect angle for your bow.

The 3-Way Concealment & Belt Leather Holster by 1791 Gunleather is the ideal balance of protection and comfort, allowing three possible carry positions: Vertical, Horizontal, and Cross-Draw. No other holster provides the same high-quality...

The LBE Unlimited AR-15 REV Flash Hider effectively breaks up the muzzle blast from your AR-15 rifle, reducing your flash signature. With an included crush washer, the flash hider can be indexed to assist in controlling muzzle rise and flash dispersion...

The Allen Company Inside-The-Pant Conceal Carry Gun Holster provides you with a thin profile holster, with soft exterior fabric, for easy and comfortable concealment. Snag-proof, smooth lining helps you with faster draw speeds and is designed for...

Guide the loaded magazine smoothly and quickly into the Glock pistols grip with the sleek Glock 17 compatible Magwell from Tyrant Designs. Made of high quality materials, these carefully designed magwells make it so easy that with just a little practice...

The EDC is an inside the waist band conceal-carry holster. This holster is small, convenient and low-profile. the holster clips over the outside of the pant for secure fit, has a moisture barrier behind the comfort panel and a breathable comfort spacer...

TALON Grips' U.S. Patented designs consist of a single piece of thin rubber or granulate material that wraps around the handle which adds hardly any bulk while providing a rock solid grip. Their grips stick to polymer, lasts longer and will come off...

The M249 9/16x24LH Muzzle Device features Rugged Suppressors' Dual Taper Locking System and is compatible with Rugged Suppressors Surge762, Razor762, and Micro30.

A compact, lightweight muzzle device, the JK HD Bald Eagle Compensator reduces recoil and provides a QD mounting point for your JK Quick Attach Taper Mount-equipped suppressor. *Recommended torque spec 35ft/lbs

The One Point Bungee Rifle Sling is designed to be a fully adjustable, single point sling to secure your AR-15 or similar style rifle with a flexible, high density elastic bungee style sling.

C&G's IWB Covert holster is made to be the best and most comfortable concealed carry inside of the waistband (belt) holster. It is CNC designed and manufactured out of Kydex with solid locking retention. C&G Holsters are 100% made in America, by...

The RR3 choke is made for long-range targets. This choke is specifically designed for geese and open water ducks. The internal cuts provide optimal pattern density when paired with the correct loads. These choke tubes are built from years of product...

Bulldog's Molded Inside the Pocket Holster is made from quality leather which has been hand tooled and tanned to provide a durable, attractive product. The holster allows for multiple fits, eliminating the problem of having so many costly items to stock...

Carlson's Black Cloud choke tubes are specifically designed to get the most performance from Federal's new Black Cloud Ammunition, but perform extremely well with other steel shotshells. The Extended tube is constructed of a Titanium-coated steel, the...

CMMG's Barrel Sub-Assembly is ideal for building your custom AR-15 upper group. It comes with properly installed M4 barrel extension.

The UTG Angled Index Mount is an M-LOK compatible mount designed for left or right side handguard installation, offering a reversible design. It features a thumb indexing deck that can be configured for either forward or rearward cant to suit your...

The Safariland 7360RDS 7TS Mid-ride holster is specifically designed to fit and protect weapons with red dot optics. The 7360RDS 7TS Mid-ride holster features ALS (Automatic Locking System) retention, which is completely operable with the thumb, making...

This replacement or spare magazine is compatible with your Ruger SR. It is constructed of heat treated steel with injection molded mag follower and mag spring formed from chrome silicone wire. Made in the USA.

Bulldog's Polymer Magazine holder is ambidextrous and is gun specific. Included is a paddle attachment, a draw angle tool and the paddle has a comfort wear silicone lining for extra comfort. Compatible with Glock 17/19/22/23/26/27/31/32/33/34 Gen1-4.

Made of tough, nylon Cordura, this stock pad is the perfect accessory for your rifle - with elastic loops and a zippered accessory pouch. This versatile pouch can hold five cartridges on the exterior while providing a padded cheek weld. Available in...

The 19L Thumbsnap leather hi-ride holster is worn on the hip close to the body for concealability with soft suede lining for protection of the firearm. Made for semiautomatics it features a traditional thumb break design and carries the pistol at a...

This Horizontal Single Magazine Pouch features a hook and loop belt attachment that wraps around belt.

Carlsons Cremator Choke Tubes feature our brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions. TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual...

The Blackhawk's Omnivore multi-fit holster accommodates more than 150 styles of semi-automatic handguns. The active retention mechanism locks onto a proprietary rail attachment device, not the frame of the handgun for the non-light bearing model. Its...